Others have a cup shape, so you’ll need to fill the filter with cold water, give it a small shake, tip out the dirty water, then repeat.
However, if cleaning the filter hasn’t fixed a low-suction problem, there is probably a blockage elsewhere in the vacuum.The most likely culprits are the main tube, outlet from the bin (you’ll need to remove the bin to access this), and inside the tools.. It’s also possible that hair has become tangled around the Power Brush brushroll.
To fix this issue,.remove the brush and carefully cut away hair.Gtech has made it easy to clean the Multi Mk2’s filter.
Here’s a quick recap of the process:.Remove the bin and pull out the filter..
Tap off excess dirt into a bin (you may also want to tip loose dirt inside the filter housing into a bin).
Rinse the filter in cold water from a tap without a detergent.If there’s nothing.
stopping the brush from turning, then a broken drive belt is the most likely culprit.. What exactly is a drive belt though?And how does it relate to a stuck brush?.
A vacuum’s belt drives the brush to turn at a high speed.Over time, it’s common for a belt to become stretched or broken, especially as vacuum belts are often made from rubber..